How to Connect a WiFi Extender to Your Router?

Feb 14, 2024 | How to, Blog, Troubleshooting | 0 comments

Do you need to expand your home or office Wi-Fi network’s range but find the signal from your router doesn’t reach far enough?

Adding a WiFi extender is an excellent way to boost your existing wireless coverage and eliminate dead zones. But how do you go about connecting your new extender device to your current router? There are a few different effective methods to choose from.

In this comprehensive guide, we will explore the steps for how to connect WiFi extender to router using WPS (WiFi Protected Setup), without WPS, and also with an ethernet cable.

You’ll learn key pre-setup tips, detailed instructions for each process, and troubleshooting advice to help ensure a smooth and successful setup. With the right extender placement and connection method, you can enjoy seamless expanded Wi-Fi coverage.

Key Pre-Setup Steps to Complete Before You Begin

Before connecting your new WiFi extender to your existing router, there are a few key steps you should complete to ensure the setup process goes smoothly:

  • Update your router firmware: Check the manufacturer’s website for the latest firmware version for your router model and update it if needed. Keeping the firmware updated helps maximize compatibility between devices.
  • Position the extender: Determine the optimal location halfway between your router and the WiFi dead zone you want to boost. The extender needs to be able to receive a strong signal from the router to amplify it.
  • Charge the extender: If your WiFi extender is powered by a battery, make sure it is fully charged before starting the setup. This ensures the extender won’t lose power mid-process.
  • Gather supplies: Have the WiFi password for your existing network handy. You may also need an ethernet cable if connecting initially with an ethernet cable setup.
  • Reset the extender: Reset your new extender to factory default settings so it’s ready to pair with your router. Refer to the device instructions.
  • Download apps if needed: Some WiFi extenders have companion apps that facilitate setup. Download any required software.

Completing these steps prior to connecting will get your devices ready and make the setup process quicker and easier.

How to Connect Wifi Extender to Router with WPS

Using WPS (WiFi Protected Setup) is a quick and easy way to connect your WiFi extender to your existing router wirelessly. Follow these steps to connect WiFi extender to router with WPS:

Total Time: 10 minutes

Step 1: Position the extender

Place your new WiFi extender halfway between your router and the area where you want to boost WiFi coverage. The extender needs to be close enough to pick up a strong signal from your router’s wireless network.
For best results, elevate the extender and make sure there are no obstructions between it and the router.

Step 2: Initiate the WPS pairing sequence on the router

Locate the WPS button on your router. It may be marked with the WPS logo or simply say “WPS.”
Press and hold the WPS button on your router for 3-5 seconds. This puts the router in pairing mode to sync with your extender.

Step 3: Initiate WPS on the extender

Within 2 minutes of pressing the WPS button on your router, press and hold the WPS button on your WiFi extender.
Hold the extender’s WPS button for 3-5 seconds until the LED light begins flashing, indicating WPS pairing mode is activated.

Step 4: Wait for the WPS connection

The WPS LEDs on both your router and extender will start flashing. This indicates they see each other and are trying to establish a connection.
It may take up to 2 minutes for the devices to sync up. Once successfully connected, the flashing LEDs will turn solid.

Step 5: Check the extender connection

If your extender has a mobile app, open the app and follow any setup instructions shown to complete the WPS process.
Connect a device like your laptop or phone to the extender’s new extended network. If you can connect successfully, WPS was successful.
Now run a speed test to confirm your extender is providing the expected WiFi coverage and speed boost.

That’s it! WPS provides a quick wireless connection between your existing router and the new extender. Enjoy your expanded WiFi coverage. But, if you wish to connect WiFi extender to router without WPS keep on reading this article.

How to Connect Wifi Extender to Router Without WPS

If your router and extender don’t support WPS, don’t worry – you can still connect them together wirelessly without using WPS. Follow these steps to connect WiFi extender to router without WPS:

Step 1: Position the extender

Place your new WiFi extender about halfway between your router and the area you want to boost the WiFi signal to.

Make sure the extender has a line of sight to your router and elevate it if possible.

Step 2: Connect WiFi extender to router network

On your extender, scan for available WiFi networks and select the network name (SSID) of your router’s WiFi.

Enter the password for your router’s WiFi when prompted. This will connect your WiFi extender to your router’s wireless network.

Step 3: Configure extender settings

Once connected, you may need to log into your extender’s web or app interface to complete setup and configuration.

Provide your desired network name and password for the new extended network. The extender will broadcast this secondary network.

Step 4: Verify connectivity

Connect a device to the new extended network and test the connection speed and range.

Run a speed test and make sure you are getting the expected boost from your extender compared to connecting directly to the router.

Step 5: Adjust placement if needed

If the speed is slow, experiment with adjusting the extender placement and checking connection speeds until you achieve optimal range and performance.

Following those steps will allow you to complete a wireless connection between your router and extender without using WPS.

How to Connect Wifi Extender to Router with Ethernet Cable

Using an ethernet cable for the initial setup provides a stable wired connection to configure your extender. Follow these steps to connect WiFi extender to router with ethernet cable:

Step 1: Position the extender

Place your WiFi extender about halfway between your router and the area where you want to boost WiFi coverage.

Step 2: Connect ethernet cable

Use an ethernet cable to connect from an open LAN port on your router to the ethernet port on the extender.

Step 3: Configure extender

Once connected via ethernet, log into your extender’s web interface or app.

Follow the setup prompts to configure your extended network name (SSID) and password.

Step 4: Enable wireless

Make sure the extender’s wireless radio is enabled so it can broadcast your extended network.

Step 5: Disconnect ethernet cable

You can now disconnect the ethernet cable between the router and extender. The extender will remain connected wirelessly to broadcast the extended network.

Step 6: Verify connectivity

Connect a device to your extender’s new extended wireless network.

Run a speed test to verify you are getting the expected speed boost from your extender.

Using a wired ethernet connection for the initial extender setup helps ensure a solid reliable connection to get it configured. Once set up, the extender will remain connected wirelessly to your router.

Troubleshooting Tips for Issues while Connecting WiFi Extender to Router

Sometimes issues may arise when pairing an extender to a router. Here are some troubleshooting tips if you encounter issues connecting your extender and router:

  • If the WPS connection fails, try resetting both devices and trying again. Also, make sure they are within close range during pairing.
  • If you don’t see your router’s wireless network to connect to, double-check that the router’s WiFi is enabled and try moving the extender closer. You can also check out our article on How To Troubleshoot Netgear_Ext Not Showing Up in the WiFi List.
  • If you experience a Netgear extender slow speeds after connecting, experiment with repositioning the extender closer or farther from the router to optimize the signal strength.
  • Check for possible interference from appliances, walls, or large objects blocking the signal between the router and extender. Change their position.
  • Update the firmware on both the router and extender to the latest available versions. Being outdated could prevent proper connectivity. Check out our article on How to Update Firmware on Your Netgear WiFi Extender? and How to Update Firmware on Netgear Router.
  • For ethernet connections, try swapping for a different ethernet cable or using different LAN ports on your router if you can’t establish a link.
  • Factory reset the extender and router to their default settings and start the connection process from scratch if issues persist. You can check our article on how to factory reset the Netgear router for more information.
  • Check the manufacturer’s support site for your devices for additional troubleshooting tips.
  • Contact your internet service provider or the manufacturer for assistance if you are still unable to get your extender online after trying these steps.

Wrapping Up

Connecting your new WiFi extender to your existing wireless router is straightforward when you follow the steps outlined in this guide. Key factors are proper extender placement, using WPS or ethernet for initial setup if possible, and optimizing the connection. If issues occur, resetting devices and upgrading firmware can help get an extender online. With robust Wi-Fi expansion capabilities, WiFi extenders are a great investment for home and office networks struggling with a limited router range. Just take care when selecting your connection method and be patient during configuration to ensure your extender pairs successfully with your router. Your network will be enjoying expanded seamless Wi-Fi coverage in no time.

FAQs

How do I connect my extender to my router?

You can connect WiFi extender to router wirelessly using WPS or by connecting to your router’s WiFi network or using an ethernet cable.

Can you connect a WiFi extender to a different router?

Yes, WiFi extenders are designed to work with any standard router, so you can connect an extender to a different brand router.

How do I connect my TP-Link extender to my router?

Connect your TP-Link extender to your router wirelessly by using WPS or selecting your router’s network name and entering a password.

Should WiFi extender be connected to the router?

Yes, a WiFi extender needs to connect to your router wirelessly or via ethernet in order to boost and extend the router’s signal.

Why won’t my extender connect to my router?

Common issues are incorrect passwords, weak signals, outdated firmware, or interference. Try resetting and repositioning devices.

How can I extend my WiFi range?

Adding a WiFi range extender is the easiest way to expand your router’s wireless coverage area.

Which is better WiFi extender or repeater?

The extender and repeater function the same way – boosting WiFi range. Extender is the more commonly used term.

What is better WiFi mesh or extender?

Mesh systems provide whole home coverage while extenders boost range from a single router. Mesh is better for larger homes.

What is WPS on a router?

WPS stands for WiFi Protected Setup – it lets you easily connect devices like extenders to your router wirelessly.

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *

three + two =

Share This